The machine is manufactured on the basis of Turbopak-254 and can be used both as stand-alone and as part of other lines.

The machine operates in automatic and semi-automatic mode.

The heat shrink tunnel is manufactured in accordance with the technical conditions that allow the machine to be operated at a temperature of +10 to + 35°C and a relative humidity of not more than 60% at a temperature of + 20°C. 254 AM-15 shall be installed away from flammable materials in well-ventilated areas, which interior meets the requirements of current Sanitary Rules and Regulations for this production.

The operation principle of the heat shrink machine 254 AM-15:

Packing items are automatically/manually delivered onto the feeding conveyor and picked up by the discharge conveyor.

The sensor system allows to automatically monitor the item length, stop the discharge conveyor while the sealing head is in operation, and move the item onto the conveyor of the heat shrink module.

Passing through the tunnel, the film shrinks and is cooled by the fan at the exit end.

Products to be packed:

The machine is designed for packaging single and group blocks of products that are pre-packaged into:

  • Bottles (glass)
  • PET bottles
  • Pure Pack
  • Boxes
  • Pillow bags

Kinematical speed, max, cycles/min. 15
Block width, mm 400
Block length, mm 500
Block height, mm 280
Film thickness, mcr 50-120
Film reel width, max, mm 700
Film reel diameter, max, mm 300
Film reel weight, max, kg 20-25
Thermo tunnel dimensions, mm 1300*680*440
Power consumption, kW 23,5
Air pressure, MPa 0,6
Air consumption, l/min 210
Machine length, mm 3550
Machine width, mm 1300
Machine height, mm 1960
Machine weight, kg 960
  • Feeding conveyor
  •  wrapping unit
  •  heat shrink unit
  • Outfeed conveyor (apron or belt)
  • Roll table
  • Discharge conveyor (after heat shrinking)
  • Unit of upper unwinding film roll loading and fixation

Related items

Performance: up to 6000 cycles/h.
Performance: up to 3000 cycles/h.
Performance: up to 20 pcs/hour